| Description | Parameter | ||
| Model | RZ9060N | RZ1390N | RZ1610N |
| Working area | 900*600mm（X*Y) | 1300*900mm | 1600mm*1000mm |
| Working table | Knife table / honeycomb table | ||
| Laser power | 80W/90w/100w/130w/180w | ||
| Power Supply | 110v/220v/50HZ /60HZ | ||
| Min line width | ≤0.15mm | ||
| Position accuracy | 0.01mm | ||
| Repetition accuracy | 0.02mm | ||
| Cutting speed | 150mm/s | ||
| Guide rail | Hiwin square rail from Taiwan | ||
| Transmission method | Belt Transmission | ||
| Drive system | 3phase Stepper motor and driver | ||
| Cooling system | Water-cooling | ||
| Control system | Ruida(USB interface) | ||
| Control software | RDCAM ,Coreldraw, Photoshop, AutoCAD, Tajima | ||
| Graphic format support | PLT,DXF,BMP,JPG,AI,ect | ||
| Working environment | 0-45℃ | ||
| Operating Humidity | 5-95% | ||
| Cutting speed | 0 - 20000mm/min | ||
| Engraving Speed | 0 - 40000mm/min | ||
| Net /Gross weight | 300 /380kg | 450/550kg | 550/650kg |
We mainly use RECI brand laser tube for nonmetal co2 laser,Compared with the laser tube of the same level, it has high efficiency and stable quality, and its service life is 10000 hours
Laser head with red point,easy for operator to know the position of laser
Knife table can load almost all hard material.honeycomb table is good for processing thin materials like leather, fabric and paper etc.
3phase steper motor with leadshine driver.Low heat radiation .Run smoothly at ultra-low speed.Reduce the vibration ,avoid oscillation .Efficient torque enhancement .
Dia 20mm/25mm,focus length 63.5mm CO2 znse laser focus lens and dia 25mm/30mm mirror
