| Description | Parameter | |
| Model | RZ1325M | RZ1530M |
| Working Area | 1300*2500mm(x*y) | 1500*3000mm |
| Laser power | 180w/300w/500w/600w | |
| Working table | Knife table | |
| Power Supply | 380v/ 220V1 PHASE /50Hz/60Hz | |
| Min line width | ≤0.15mm | |
| Position accuracy | 0.01mm | |
| Repetition accuracy | 0.02mm | |
| Cutting speed | 150mm/s | |
| Guide rail | Hiwin from Taiwan | |
| Transmission method | Y axis with gear, X axis with belt, Z axis ball screw | |
| Drive system | Stepper motor and leadshine drive system | |
| Cooling system | Water-cooling | |
| wter chiller | CW5200/CW6000/CW6200 | |
| Control system | Ruida 6332M controller | |
| Control software | RDCAM | |
| Graphic format support | PLT, DXF, BMP, JPG ,AI ,ect | |
| Working environment | 0-45℃ | |
| Operating Humidity | 5-95% | |
| Net/Gross weight | 900/1050kg | 1100/1250kg |
Auto focus function ,Support manual and automatic mode switching when cutting metal steel. stepper motor with ballscrew transmission for Z axis
Dia 20mm/25mm,focus length 63.5mm CO2 znse laser focus lens and dia 25mm/30mm mirror
Cooling the laser tube,reducing the temperature of the laser tube and prolonging the service life.CW3000/CW5200/CW6000/CW6200
Y axis with dual gear transmission,heavy duty welding frame with adjusting feet.
carbon steel, stainless steel.galvanized sheet.Wood, paper, leather, cloth, Plexiglas, epoxy resin, density board, double-colored board, marble, plastic, rubber, ceramic tile, crystal, bamboo and other nonmetal materials.
