| Description | Parameter |
| Working Area | 600*600*150mm(X*Y*Z) |
| Resolution | 0.01mm/300mm |
| Lathe Structure | Steel Structure, table moving |
| X,Y Structure | Y, X axis are TBI ball screw transmission, |
| Taiwan 20mm square guide rails | |
| Z Structure | Z axis is TBI ball screw transmission, |
| Taiwan 20mm square guide rails | |
| Spindle | 2.2kw water colled spindle |
| Spindle Speed | 0-24000r/min, variable speed |
| Working Voltage | AC230V/60Hz |
| Motor and driver | Stepper motor and drivers |
| Command | G code (HPGL,U00,mmg,plt) |
| Compatible Software | Ucancam/Type3/Artcam/Artcut etc |
| Operating System | DSP A11 |
| Diameter of Cutter | φ3.175-φ12.7 |
| Cooling Mode | water-cooling |
| Work Holding | T-slot table |
| Net /Gross Weight | 220/330KG |
| Package size | 1660*1650*1770mm |
Water cooled spindle with low noisy ,good cooling effect ,Rotating speed: 24000RPM/min
High performance, low cost stepper motor.Compared with the common stepper motor in the market, it has the advantages of larger torque, lower heat, better running stability and so on
Adopted Taiwan Hiwin linear guide rail, high positioning accuracy, scroll guide, reduce wear to maintain accuracy for a longer time.
1.It is suitable for engraving,milling and drilling compactly all sorts of materials such as steel,copper,aluminum and plastics.
2. It can widely apply to automotive,injection mould,ironware mould and engrave mould industries.
3. Especially designed for engraving and milling molds,eyeglasses, watch,panel,badge,brand, graphics and words of three-dimensional and outside surface's sleeking
