Laser Welding Machine Operation Instructions

laser welding machine operation steps
1. First of all, confirm that the working surface of the laser welding machine is clean and tidy, and there is no debris to block.

2. Turn on the power switch and check whether the laser device works normally, whether the laser beam appears.

3. Adjust the focus beam point of the laser welding machine so that it can focus on the weld of the welding material.

4. Place the parts to be welded on the work table and fix them.

5. Adjust welding parameters, such as power, speed, beam diameter, etc., according to the actual situation.

6. During the welding operation, keep the hand stable and do not shake, so as not to affect the welding quality.

7. After welding, turn off the power switch and pay attention to safety.

8. Clean the laser welding machine, remove welding debris, and keep the equipment clean and in good condition.



laser welding machine safety precautions
1. When operating the laser welding machine, you must wear appropriate protective glasses to protect your eyes from laser damage.

2. Do not reach into the laser beam to avoid burns and other accidental injuries.

3. The light generated by the laser welding machine may cause damage to the skin, so direct exposure to the laser beam should be avoided as far as possible.

4. When the laser welding machine is not used, the power supply should be cut off to ensure safety.

5. When cleaning the laser welding machine, first cut off the power supply, and then clean up, so as to avoid electric shock or other accidents.


Common faults and treatment methods of laser welding machine
1. The laser beam cannot be focused: Check whether the laser source works properly and whether the beam output is normal.

2. Welding quality is not ideal: check whether the focus is accurate and whether the welding parameters are appropriate.

3. If sparks or smoke appear during the welding process, check whether the welding material has impurities and remove the impurities before welding.


Precautions for laser welding machine
1. laser welding machine is a high-voltage electrical equipment, non-professionals are prohibited to disassemble and repair.

2. When using laser welding for a long time, attention should be paid to the heat dissipation of the equipment to prevent overheating from causing accidents.

3. When operating the laser welding machine, keep the surrounding environment clean to avoid accidents caused by impurities or combustible materials.

4. Regular maintenance and maintenance of the laser welding machine to maintain the normal working condition of the equipment.




Advantages and application fields of laser welding machine
1. laser welding machine has the characteristics of fast welding speed, small welding seam and high precision, which is suitable for welding work with high requirements.

2. laser welding machine is widely used in automotive manufacturing, aerospace, engineering machinery, electronic equipment and other fields, can achieve efficient and accurate welding machine operation.

The above is the laser welding machine operating instructions. I hope this can be of some help. In the use of laser welding machine, safety operation procedures are followed to ensure personal safety and normal operation of equipment.