Configurations & technical parameter | |
Working area | 1500*3000mm |
Control System | CYPCUT controller with wireless DSP |
Laser head | auto focus |
Guide rail | Taiwan Hiwin linear guide rail 30mm |
Transmission | Rack and pinion transmission |
Electronic Components | French Schneider |
Motor | Japan FUJI Y axis 1300w ,X axis 850w ,Z axis 400W servo motor |
Max Cutting Speed | 35m/min |
X axis max speed | 65m/min |
Y axis max speed | 70m/min |
Z axis max speed | 30m/min |
X axis max acceleration | 1.5G |
Y axis max acceleration | 1.5G |
Cooling Way | Water Cooling |
Min line width | 0.1mm |
Power Requirements | 220V/380V ,50/60hz ,3 phases |
rotary device | diamter :20-220mm, length 3meter/6meter |
BM110/BM114 laser head with auto focus function ,Auto focus to reduce human intervention and improve piercing and cutting efficiency.3 Cover glasses (top, middle and bottom) to protect collimation & focus lens.
Japan FUJI/YASKAWA ,Chinese INOVANCE servo, Taiwan YYC/VASTUN gear and rack,Taiwan Hiwin rail guide,French MOTOVARIO reducer, ensure the precision and stability.
Chinese Raycus laser source ,good at cutting carbon steel, stainless steel.
Clamp for 20-220mm pipe, 20-150mm square tube
Based on EtherCAT, integrating motion control, laser control, and gas control ,It is easy to install and debug