| Description | Parameter |
| X,Y Working Area | 1300*2500*500mm |
| A axis | 180 degree rotated |
| Z Working Area | 500mm |
| Lathe Structure | Seamless welded steel structure, better than cast iron one |
| X,Y Structure | Rack and pinion, gear drive,Taiwan 25mm square guide rails |
| Z Structure | Taiwan TBI ball screw,Taiwan 25mm square guide rails |
| Spindle | 6.0kw |
| Spindle Speed | 0-18000r/min, variable speed |
| Cooling Mode | Air-cooling |
| Working Mode | SERVO |
| Motor and driver | Japanese Yaskawa servo motor and drivers |
| Operating System | Syntec |
| Diameter of Cutter | φ3.175-φ22 |
| Max. Traveling Speed | 55m/min |
| Max Working Wpeed | 20m/min |
| Compatible Software | Ucancam/Type3/Artcam/Artcut /powermill etc |
| Resolution | 0.01mm |
| Command | G code (HPGL,U00,mmg,plt) |
| Working Voltage | AC220V,1PH or 380V,3PH, 50/60Hz |
Rotating speed: 18000/21000 RPM. Longlife time bearing ,No external cooling equipment is required
INOVANCE MS1 motor has IP67 protection, high seismic design characteristics, to ensure the continuous operation of equipment, safety and lasting.
Japan SHIMPO reducer
Adopted Taiwan Hiwin linear guide rail, high positioning accuracy, scroll guide, reduce wear to maintain accuracy for a longer time.
Taiwan Syntec 60W-E 4 axis Controller
Foams ( Polyfoam, PU,PS,EPS), Composite materials, Wood and by-products, Expanded plastic and alveolar plates, Plastics (Acrylic, Nylon, PVC/ PCB/ABS), Light alloys with Aluminium or copper basis, Soft stones, marble, granite (only engraving), Plaster
